Others

Sort By:  
Joystick Module

This is a Joystick Module very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is press down.

With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.

The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, analog value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.

Applications:

  1. As square wave signal generator which generates a square wave signal
  2. To provide a signal to the stepping motor driver
  3. Adjustable pulse generation for chip use
  4. Produce variable pulse signal, the control-related circuit (PWM dimming, speed)

 

Specifications:

  • Dimensions: 40 x 27 x 15 (LxWxH) mm
  • Weight: 10gm (without Hat).
  • 54mm pin interface leads
  • Operating Voltage: 5V.
  • Long service life and stable performance
  • Standard interface and electronic building blocks
₹99.00
₹149.00
HTC Lux Meter
A light meter or a lux meter is a device used to measure luminance flux per unit area. In other words, it is a device used to measure the amount of light prevailing in a specific area. Usually this is used as a measure of the intensity, as perceived by the human eye. Illuminanace is a measure of how much luminous flux is spread over a given area or simply put, the amount of visible light present at a specific place. Previously analogue meters were used to measure amount of luminous flux. These meters used to work on the radiometric technology. One of the major disadvantage with these analogue meters was that the measurements were usually not accurate therefore the need of digital flux meters surfaced. HTC’s LX-101A is a premium range of digital lux meters. Equipped with latest technology, these meters are capable of picking even the slightest emission of light flux from any surface.

FEATURES:

Data holding capacity – this range from HTC has a special memory feature which enables it to hold data relating to the previous measurements made.
Power efficient – the LX-101A range automatically shuts off when not in use. This helps it to work for a longer duration without exhausting much of its battery. Further it saves the operator from the need of replacing the battery every now and then.
Technology – this range is effective in all aspects. Its technology stands unmatched as compared to its peers. A silicon of photo electricity diode is put into work to pick up the traces of light.
Portable and intelligent – the LX-101A comes in handy for day to work. Also it intimates the user of low battery so the batteries can be replaced soon.

TECHNICAL DATA:

• Display – liquid crystal display
• Range of lux – 0 to 2,00,000 lux
• Accuracy – ± 5%
• Battery life – 200 – 250 hours
• Power supply – 9V battery
• Dimensions – 148 x 70 x 40 mms respectively (L x W x H)
• Photo diode detector dimensions – 82 x 55 x 7 mms respectively (L x W x H).
₹1,999.00
₹2,499.00
Buzzer 5V
5V Active Alarm Buzzer, beeps continously.

Working Voltage: 5V
Dimension: 9x5.5 mm
Weight: 0.65g
₹19.00
Condenser MIC
Condenser microphone to record sounds and get the analog output.

Working Voltage : 5V
Material             : Metal
₹9.00
Joystick Mountable
This is a Joystick very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is press down.
Solder it on your custom designed PCBs.

Applications:

As square wave signal generator which generates a square wave signal
To provide a signal to the stepping motor driver
Adjustable pulse generation for chip use
Produce variable pulse signal, the control-related circuit (PWM dimming, speed)


Specifications:

Weight: 10gm (without Hat).
54mm pin interface leads
Operating Voltage: 5V.
Long service life and stable performance
Standard interface and electronic building blocks
₹90.00
Per Page      1 - 5 of 5
  • 1