Radio Frequency

Sort By:  
ASK315 MHz Transceiver
These modules operate on 315 Mhz ISM Band
Transmitter is SAW based & offers about 50-100 meters range in Line-of-Sight.
Module uses ASK form of modulation

Application :
Remote control switch
Automobile anti-theft products
₹240.00
ASK434 MHz Transceiver
These modules operate on 434 Mhz ISM Band
Transmitter is SAW based & offers about 50-100 meters range in Line-of-Sight.
Module uses ASK form of modulation

Application :
Remote control switch
Automobile anti-theft products
₹199.00
Xbee Programming Shield
This shield is used to program your Xbee modules using a USB cable.
Built in LEDs for power, TX/RX.

Operating Voltage : 5-12V
₹449.00
Xbee S2
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

• 3.3V @ 50mA
• 300ft (100m) range
• Wire antenna
• Local or over-air configuration
• AT or API command set

Note : Please check with your local laws regarding radio communication.
₹999.00
Xbee S1
This is a very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

• 3.3V @ 50mA
• 250kbps Max data rate
• 1mW output (+0dBm)
• 300ft (100m) range
• Wire antenna
• Fully FCC certified
• 6 10-bit ADC input pins
• 8 digital IO pins
• 128-bit encryption
• Local or over-air configuration
• AT or API command set

Note: Please check with your local laws regarding radio communication.
₹1,199.00
₹1,199.00
Xbee S2 with Programming Shield
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

• 3.3V @ 50mA
• 300ft (100m) range
• Wire antenna
• Local or over-air configuration
• AT or API command set

Note : Please check with your local laws regarding radio communication. The shield is used to program your Xbee modules using a USB cable.
Built in LEDs for power, TX/RX.

Operating Voltage : 5-12V
₹1,999.00
Xbee S1 with Programming Shield
This is a very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

• 3.3V @ 50mA
• 250kbps Max data rate
• 1mW output (+0dBm)
• 300ft (100m) range
• Wire antenna
• Fully FCC certified
• 6 10-bit ADC input pins
• 8 digital IO pins
• 128-bit encryption
• Local or over-air configuration
• AT or API command set

Note: Please check with your local laws regarding radio communication. The shield is used to program your Xbee modules using a USB cable.
Built in LEDs for power, TX/RX.

Operating Voltage : 5-12V
₹1,699.00
Per Page      1 - 7 of 7
  • 1